The Revolution Gear and Axle's Dana 30 inverse 4.88 differential provides exceptional performance for Jeep Wrangler JK (2007-2018) & Jeep Wrangler JL (2018-2023) non-Rubicon. This differential is constructed from high-quality steel and precisely heat-treated to Original Manufacturer (OEM) specifications, making it one of the best options available in the aftermarket. All Revolution Gear differential kits come with a 2-year warranty against defects.
Technical specifications:
- Number of cover screws: 10 screws
- Material: 8620 steel
- Number of blades in the gear shaft: 26 blades
- Ratio: 4.88
- Ring Truss Bolts: 10 x 3/8 inch
- Ring gear rotation direction: reverse
- Dimensions: 39 x 29 x 14 cm
Note about compatibility:
- Compatible models:
- (2007-2018) Jeep Wrangler JK
- (2018-2023) Jeep Wrangler JL
Instructions for preparing new gears:
All new gear sets need a conditioning period to prevent overheating damage. Overloading or overheating will deteriorate the gear oil, causing the ring gear and worm gear to fail.
Follow these instructions:
- Avoid severe acceleration during the preparation period.
- Keep vehicle speed below 60 mph for the first 100 miles.
- Drive the car for 15 to 20 miles, then stop and let the gears cool before continuing.
- Drive the car at least 500 miles before starting a tow. The first tow should be less than 15 miles, then let the gears cool before continuing.
- Change the gear oil after 500 miles of conditioning, to remove metal particles and phosphate layer from the gear train during the conditioning period.
Gear oil specifications:
Recommended to use 80W-90 or 85W-140, non-synthetic, GL5 or higher, gear oil from a well-known brand.
summary:
The Revolution's Dana 30 inverse 4.88 differential provides high performance and durability ideal for street and off-road driving. With a two-year warranty and strict configuration guidelines, you can count on this product to provide a smooth and safe driving experience.
part number : D30JK-JL-488R